One Systems PM4.M 316 Grade (Marine) Stainless Steel Pole Mount Bracket For 112.HTH, 118.HSB, 212.HC, 312.HC and CFA-2.HTH (White)
SKU: 9806835172

One Systems PM4.M 316 Grade (Marine) Stainless Steel Pole Mount Bracket For 112.HTH, 118.HSB, 212.HC, 312.HC and CFA-2.HTH (White)

$693.00 $770.00
Save 10%
No.2 Bestseller on pcvarge.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

One Systems PM4.M 316 Grade (Marine) Stainless Steel Pole Mount Bracket For 112.HTH, 118.HSB, 212.HC, 312.HC and CFA-2.HTH (White)The Pole Mount System PM4 M is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. WARNING: Do not attempt to mount multiple brackets side by side using the same banding system. The banding systems are designed for one bracket only! ONE SYSTEMS offers a variety of mounting systems designed to provide enhanced flexibility to our loudspeaker systems. The PM4 M was designed to mount

The Pole Mount System PM4/M is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures.

WARNING: Do not attempt to mount multiple brackets side by side using the same banding system. The banding systems are designed for one bracket only!

ONE SYSTEMS offers a variety of mounting systems designed to provide enhanced flexibility to our loudspeaker systems. The PM4/M was designed to mount many of ONE SYSTEMS loudspeaker enclosures to a wide variety of pole diameters. The PM4/M is constructed of 316-grade stainless steel and is designed for use in ocean front and cruise ship environments as well as inland direct weather installations.

The PM4/M will accommodate pole diameters from 10 inches (254mm) or larger. It is necessary to consult the pole manufacturer prior to installation to insure safe operating limits based on the pole construction, local wind patterns, and compliance with local and national codes.

The PM4/M was designed to be used with the ONE SYSTEMS 112HTH, 212HC, 312HC, 118HSB and CFA-2HTH loudspeaker enclosures. The system consists of a pole mounting bracket that includes a tilting function. The tilt function allows down tilt, in 5 degree increments, from 0 degrees to a maximum down tilt of 35 degrees. The PM4/M is designed for pole mounting only. If flat surface installation are specified, the PT76/M must be used.

The PM4/M is constructed from heavy gauge 316-stainless steel and is designed for outdoor installations. The system is mounted to a pole using a stainless steel band and clamp system. The banding system and components are available from BAND-IT- IDEX Corporation. Details and sourcing information are available in the installation manual.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 9806835172

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1127 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Richard G.
Los Angeles, US
★★★★★ 4
Works well...but the price!
I ordered two sets to connect 3 monitors together for a workstation at my job. These are well designed and the magnets are pretty strong. Installation is easy and it holds the alignment well. The only issue is the price. For what it is, the price is quite high. The value proposition would be much higher for those who need to be able to not have them aligned from time to time, such as rotating one around for others to see in an office. But if don't need to do this and just want alignment, there are much cheaper options. If you want to go the cheapest DIY route and it won't be seen, some popsicle sticks with two sided tape works well. You can crack them in the middle to act as a hinge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
K
Verified Purchase
Kayla m
Dallas, US
★★★★★ 5
Awesome product only thing that worked
I originally thought the Screen Buddy was overpriced, but after spending hundreds of dollars trying to perfectly align my monitors for sim racing, this is genuinely the only thing that has actually worked properly. Triple monitor alignment is one of the most frustrating parts of building a sim rig, especially with monitor arms constantly moving or sagging. This finally made everything line up the way I wanted. Expensive? Maybe. Worth it after all the headaches? Absolutely. Great job.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
M
Verified Purchase
medic4life
Port Orchard, US
★★★★★ 1
Doesn't stick
The adhesive tape kept coming off. I cleaned and followed the installation instructions, but it still kept coming off. Wouldn't recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
R
Verified Purchase
Ronald M.
Lowell, US
★★★★★ 5
Works Great, Very happy customer
I’ve tried a few different ways to connect and manage dual monitors, and the Screen Buddy Dual Monitor Connector is easily one of the most straightforward and reliable solutions I’ve used. Setup was quick—no confusing instructions or extra headaches Performance-wise, it’s been rock solid. The connection stays stable and even when I bumped the monitors once, and they disconnected, it was a quick push and they clicked right back together. Build quality feels solid and durable, not flimsy like some cheaper connectors. It’s clearly designed with everyday users in mind, whether you’re working, gaming, or multitasking across multiple apps. Overall, it delivers exactly what it promises: a simple, dependable way to keep your screens connected with no gaps or one being too high or too low. Definitely worth it if you want a clean, hassle-free dual monitor setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
J
Verified Purchase
Josh A. Carie
Los Angeles, US
★★★★★ 3
Warning, if you have two different thickness of monitors these may not work as intended.
The product seems very well made and the adhesive is very strong. These seem like they would work really well if you have two monitors of the same thickness, in my case I did not and they actually created more of a gap then without.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 13, 2026

recommand products

HEPOLITE BSA B25 TRIUMPH T25 TRW25 CYLINDER LINER - MADE IN ENGLAND 70-9265
85.95
Manuele riem als opstahulp
82.50
Girls Cotton Sweater Tights - Ribbed
12.85
CD - Mdou Moctar - Afrique Victime
14.00
2CD - The Beatles - The White Album
27.99