2.5" NPSH Female x 1" NH (NST) Male Adapter Aluminum
SKU: 71596129409

2.5" NPSH Female x 1" NH (NST) Male Adapter Aluminum

$172.47 $191.63
Save 10%
No.2 Bestseller on pcvarge.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2.5" NPSH Female x 1" NH (NST) Male Adapter AluminumSpecifications Female Side 1 2. 5 NPSH Female (National Pipe Straight Hose) Male Side 2 1 NH (NST) Male (National Hose National Standard Thread) Working Pressure 300PSI Max Test Pressure 1000PSI Max Material T 6061 Aluminum (Aircraft Grade) Finishing Anodized (99. 9% Lead Free) NFPA Standards 1963, 4. 12, 5. 1 5. 6. 4 (Corrosion Resistance) Military Standards MIL A 8625 Type III, Class 1 Industrial Standards International ASTM B221 UL Labs Standards

Specifications

  • Female Side 1 – 2.5” NPSH Female (National Pipe Straight Hose)
  • Male Side 2 – 1” NH (NST) Male (National Hose / National Standard Thread)
  • Working Pressure – 300PSI Max
  • Test Pressure – 1000PSI Max
  • Material – T-6061 Aluminum (Aircraft Grade)
  • Finishing – Anodized (99.9% Lead Free)
  • NFPA Standards - 1963, 4.12, 5.1-5.6.4 (Corrosion Resistance)
  • Military Standards – MIL-A-8625 Type III, Class 1
  • Industrial Standards – International ASTM B221
  • UL Labs Standards – 236 – 8.1 Through 8.2
  • USDA Standards – 5100-190C Tables 1-4
  • Origin – Made In The USA
  • Warranty – 5 Year Manufacture

Industrial & Fire 2.5” NPSH Female x 1" NH (NST) Male Fitting Anodized Aluminum

Need a female to male adapter?  Look no further, this adapter will get the job done in any situation.  Adapters manufactured in the USA with hard-coated anodized aluminum are made to withstand abrasion, are anti-corrosive, and can withstand the highest pressures.  You can trust that these adapters will meet and EXCEED your industrial and municipal needs. 

More About Female To Male Adapters

A pipe & fire hose fitting adapter is used to connect straight pipe or hose sections, to adapt to different sizes or shapes, and for other purposes. 

Pipe & hose adapter is a length of straight or tapered pipe with male or female threads on both ends. It is one of the most popular category of pipe & hose fittings. It is a connector or a coupling threaded on both ends. Pipe adapters are used to allow items with different threads to be connected together. They are used to fit straight / tapered end hose or pipes. A combination of pipe adapters are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam. 

If the two ends of a coupling are different (e.g. one NST/NH threaded and one NPT threaded), then it is usually referred to as an adapter. 

A pipe coupling is any fitting or device used to join two or more pipes in such a way that continuity is maintained between them. The body of a pipe coupling is typically made of the same or similar materials as those used to construct the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may per permanent or removable fixtures. A pipe coupling can be stepped or reduced in internal diameter to accept pipes of different sizes, be T or cross shaped to join more than two pipes, or angled to form bends. Pipe couplings may also include peripheral features or equipment such as inspection openings, flow meters, or valves.

Our Guarantee

We 100% guarantee our brass adapters.  If you are unhappy with your purchase you can return it within 30 days NO QUESTIONS ASKED!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 71596129409

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 334 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
JM
Draper, US
★★★★★ 1
Hours of my life I won’t get back.
Style: Receiver
I tried to make this system work. I REALLY did. Probably blew 10 hours trying to somehow make it work. Had to return it. Customer Support - What customer support? Yamaha cut hours from weak 9 to only 5 hrs a day. Email/chat got no call back. It’s so bad I’m not sure Yamaha is gonna make it. Lip sync - Impossible to fix video to sound lag. Musiccast wireless - See lag. Also sound is tinny as hell. Also won’t stay linked. Could not get speakers to respond to giant volume knob. Would respond to app. App was mediocre. Tried to use with YSP-5600 sound bar which is allegedly Mussiccast. Nope. In short, it has been a HORRIBLE experience and I really tried.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2022
A
Verified Purchase
AB
Boise, US
★★★★★ 3
Replacing a RXA770/780/880? You May be Disappointed.
Style: Receiver
I will start with the issues. (1.) HDMI audio drop outs. This can be fix by going into your tv and changing your audio settings from auto to pass through. However I remember this causing an inconvenience of some sort. I did not have to make this change with Marantz M1, Sony AZ1000, Or Integra DRX3.4. (2.) when unit goes into auto-standby while using the digital optical input, it will freeze after turning it on again. I had to unplug it to get it to work correctly. this happened every time. (3.) The plastic front panel can scratch easily. You may want to use a can of air to clean it. Yamaha should have flipped the design-the metal/aluminum where the glass/plastic is and the plastic where the metal is. (4) If using the coaxial for tv audio, It will take 9 full seconds before audio is heard. I had to buy a new TV(this was before the other issues were discovered). Finally (5) if you are replacing a RXA770/780/880, you may be disappointed. You'll have to step up to the RXA4A to get the features like PEQ and menus you had with them. Sound and Power: The 2 channel specs between the Yamaha RXA2A and The Yamaha RN1000A stereo receiver are similar. Don't let that fool you. The RN1000A is way more powerful and sound much better with music, however the A2A was way better than the RN1000A for movies and tv. In full range, sub off, the RXA2A could not drive the Polk RTIa5's well with music. In fact, to me the Marantz M1class D and the Sony AZ1000 70/70w class AB sounded more powerful and musical, making them easier to listen to than the A2A. The Integra best all 3 AVR's for music in full range mode without a sub to my ears. But with the 3.4, the sub output volume was way too low, I hated the click noise(sounds like it powered on again) when turning up master volume, and I couldn't use the presets without changing the source. The Yamaha RN1000a is the best for music only, especially at a sale price. My Positives: It come with a 5 year warranty when registered. It's well built, especially better than the Sony. You get 8 presets that you can set to the same source or different sources almost any kind of way. The dialogue mode works very well even for music. Yamaha Support is very helpful. If yours don't come with the above issues/defects that I listed, I think it can be easy to just set it, forget about it and enjoy it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
D
Verified Purchase
DougMac
Massapequa, US
★★★★★ 5
Excellent AVR!
Style: Receiver
Our projector in our home theater died and I updated to a 4K projector. I was using a 10 year old Onkyo receiver. It was still working fine, but being that old it did not have the latest audio codecs or 4K HDMI, so I decided to go ahead and upgrade my AVR. I had bought a relatively inexpensive Yamaha for our living room TV a few years ago and have been pleased with its performance. I looked at the RX-A2A and RX-A4A. After reading numerous reviews and tests, I decided to go with the A2A, since it was on sale and much less expensive. The difference in features were not important to me. I only need one HDMI output and only have three inputs. While the A4A has a more powerful amp and better power supply, I thought the A2A would be sufficient since our home theater is "cozy" about the same size as a living room. My speakers in my 7.1 setup are very efficient and we play music and videos at a reasonable loudness. Still, I was concerned that the A2A would match the performance of the Onkyo with its beefier power supply and more power. My fears were soon put to rest. After swapping out the units, I set up the A2A. It only took 10 minutes, including running YPAO to calibrate the system. I designed the room carefully and it has acoustic treatments, including bass traps. Therefore, the adjustments made by YPAO were minimal. We watched "No Time to Die", which has a well-regarded soundtrack full of dialog, music and special effects, including some beefy LFE. The A2A handled it all with aplomb, even at a higher-than-normal volume setting. I felt there was a noticeable improvement in audio quality. My adult son, who didn't know I upgraded to the Yamaha, remarked how the audio sounded more balanced and refined, which he attributed my sound treatments (he'd already heard the Onkyo after I had installed them). Video quality is also excellent, seamlessly passing the HDR 4K signal to the projector. Although I'm frugal and didn't want to upgrade my AVR, I'm glad I did. I'm also glad I went with the A2A.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2024
T
Verified Purchase
Timothy Cox
San Leandro, US
★★★★★ 5
Yamaha RX A2A
Style: Receiver, Style: Receiver
It was time to replace my old receiver with a current version. Much of the technology has changed when comparing receivers today versus 20 years ago. However, the Yamaha RX – A2 A offered a great balance between price and features. Hooking up my existing components and high definition television was extremely easy. I would recommend downloading the users manual from the Yamaha website to brush up on all options and features available during set up. The sound reproduction is top notch. I also hear the difference in surround sound reproduction compared to my older model. Once you spend quality time setting up your receiver to reflect the setup you desire, this model does not disappoint. I was able to set up my second zone so I can listen to a completely different input compared to the main room. I especially like the value added Bluetooth feature so I can connect directly to the receiver without any wires connection.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 11, 2026
W
Verified Purchase
Willie
Los Angeles, US
★★★★★ 5
Great Yamaha quality and features as expected.
Style: Receiver
Love it! Easy set up lots of options. Beautiful immersion sound.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2025

recommand products

Sex Extra 10 m Cotton Rope Pink
20.00
Pretty Love Power Bullet Black
59.99
Good Head Deep Throat Spray Mystic Mint
34.99
Le Wand Loop Attachment Penis Play
35.00
BLACK GLASS WORK INDOWESTERN SET
39750.00