Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Teltonika SWM280 24-Port Gigabit Managed PoE+ Switch with 4 SFP UplinksHigh Performance, Flexible Network Control Elevate your network's capabilities with the Teltonika SWM280, a powerful L2 managed switch with advanced L3 features designed for enterprise grade performance and reliability. This versatile 24 port switch offers a hybrid connectivity solution, combining 12 PoE+ ports, 12 standard Gigabit Ethernet ports, and 4 SFP fiber uplinks to meet the demands of any modern network environment. It is engineered for
High-Performance, Flexible Network Control
Elevate your network's capabilities with the Teltonika SWM280, a powerful L2 managed switch with advanced L3 features designed for enterprise-grade performance and reliability. This versatile 24-port switch offers a hybrid connectivity solution, combining 12 PoE+ ports, 12 standard Gigabit Ethernet ports, and 4 SFP fiber uplinks to meet the demands of any modern network environment. It is engineered for superior traffic management, robust security, and seamless integration into industrial systems.
Dynamic Power and Data Distribution
The SWM280 simplifies your infrastructure by delivering both power and data over a single cable. It features 12 PoE+ (IEEE 802.3at/af) ports, providing up to 30W of power per port. With a generous total power budget of 300W, it's perfectly equipped to power IP cameras, VoIP phones, wireless access points, and other PoE-enabled devices. The remaining 12 Gigabit Ethernet ports provide high-speed connectivity for workstations and other critical network devices that have their own power source.
Advanced Management & Industrial Protocol Support
Built with a foundation of Layer 2 features and enhanced with Layer 3 capabilities like static and dynamic routing (BGP, OSPF v2), the SWM280 gives you granular control over your network. It supports critical industrial protocols such as Profinet, EtherNet/IP, and MRP, ensuring seamless integration into mixed industrial environments. For simplified administration, the switch includes a complimentary 2-year subscription to the Teltonika Remote Management System (RMS), allowing for convenient remote monitoring, configuration, and control.
Comprehensive Specifications Table
| Ethernet & Fiber | |
|---|---|
| Ethernet Ports | 24 x RJ45 ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
| Fiber Ports | 4 x SFP ports |
| IEEE Standards | 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az |
| PoE (Power over Ethernet) | |
| PoE Ports | 12 ports (Ports 1-12) |
| PoE Standards | IEEE 802.3af (PoE), IEEE 802.3at (PoE+) |
| Max Power per Port | 30 W |
| Total PoE Power Budget | 300 W |
| Network & Management | |
| L2 Features | Loop protection, Forwarding table, VLAN, STP/RSTP |
| L3 Features | Static IPv4/IPv6 routing, DHCPv6 client |
| Dynamic Routing | BGP, OSPF v2, RIP v1/v2, EIGRP |
| Industrial Protocols | Profinet (Class B), EtherNet/IP, MRP (client/manager) |
| Management | WebUI, SNMP V2/V3, LLDP, Teltonika RMS (2 years included) |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 83.33 Mpps |
| System Characteristics | |
| CPU | Realtek, single core, 500MHz, MIPS-4KEc |
| RAM | 128 MB, DDR3 |
| Flash Storage | 16 MB serial flash |
| Power | |
| Connector | C14 |
| Input Voltage Range | 100-240 VAC, 50/60 Hz |
| Power Consumption | Idle: 7.5 W / Max (with PoE): 325 W |
| Physical & Environmental | |
| Mounting | Integrated bracket for Rack mounting (1U size) |
| Operating Temperature | 0 °C to 50 °C |
| Operating Humidity | Up to 90% (non-condensing) |
| Ingress Protection Rating | IP30 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 2179 reviews
Sort
Product Reviews
★★★★★ 1
Hours of my life I won’t get back.
Style: Receiver
I tried to make this system work. I REALLY did. Probably blew 10 hours trying to somehow make it work. Had to return it.
Customer Support - What customer support? Yamaha cut hours from weak 9 to only 5 hrs a day. Email/chat got no call back. It’s so bad I’m not sure Yamaha is gonna make it.
Lip sync - Impossible to fix video to sound lag.
Musiccast wireless - See lag. Also sound is tinny as hell. Also won’t stay linked.
Could not get speakers to respond to giant volume knob. Would respond to app. App was mediocre.
Tried to use with YSP-5600 sound bar which is allegedly Mussiccast. Nope.
In short, it has been a HORRIBLE experience and I really tried.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2022
★★★★★ 3
Replacing a RXA770/780/880? You May be Disappointed.
Style: Receiver
I will start with the issues. (1.) HDMI audio drop outs. This can be fix by going into your tv and changing your audio settings from auto to pass through. However I remember this causing an inconvenience of some sort. I did not have to make this change with Marantz M1, Sony AZ1000, Or Integra DRX3.4. (2.) when unit goes into auto-standby while using the digital optical input, it will freeze after turning it on again. I had to unplug it to get it to work correctly. this happened every time. (3.) The plastic front panel can scratch easily. You may want to use a can of air to clean it. Yamaha should have flipped the design-the metal/aluminum where the glass/plastic is and the plastic where the metal is. (4) If using the coaxial for tv audio, It will take 9 full seconds before audio is heard. I had to buy a new TV(this was before the other issues were discovered). Finally (5) if you are replacing a RXA770/780/880, you may be disappointed. You'll have to step up to the RXA4A to get the features like PEQ and menus you had with them.
Sound and Power: The 2 channel specs between the Yamaha RXA2A and The Yamaha RN1000A stereo receiver are similar. Don't let that fool you. The RN1000A is way more powerful and sound much better with music, however the A2A was way better than the RN1000A for movies and tv. In full range, sub off, the RXA2A could not drive the Polk RTIa5's well with music. In fact, to me the Marantz M1class D and the Sony AZ1000 70/70w class AB sounded more powerful and musical, making them easier to listen to than the A2A. The Integra best all 3 AVR's for music in full range mode without a sub to my ears. But with the 3.4, the sub output volume was way too low, I hated the click noise(sounds like it powered on again) when turning up master volume, and I couldn't use the presets without changing the source. The Yamaha RN1000a is the best for music only, especially at a sale price.
My Positives:
It come with a 5 year warranty when registered. It's well built, especially better than the Sony. You get 8 presets that you can set to the same source or different sources almost any kind of way. The dialogue mode works very well even for music. Yamaha Support is very helpful. If yours don't come with the above issues/defects that I listed, I think it can be easy to just set it, forget about it and enjoy it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
★★★★★ 5
Excellent AVR!
Style: Receiver
Our projector in our home theater died and I updated to a 4K projector. I was using a 10 year old Onkyo receiver. It was still working fine, but being that old it did not have the latest audio codecs or 4K HDMI, so I decided to go ahead and upgrade my AVR.
I had bought a relatively inexpensive Yamaha for our living room TV a few years ago and have been pleased with its performance. I looked at the RX-A2A and RX-A4A. After reading numerous reviews and tests, I decided to go with the A2A, since it was on sale and much less expensive. The difference in features were not important to me. I only need one HDMI output and only have three inputs. While the A4A has a more powerful amp and better power supply, I thought the A2A would be sufficient since our home theater is "cozy" about the same size as a living room. My speakers in my 7.1 setup are very efficient and we play music and videos at a reasonable loudness.
Still, I was concerned that the A2A would match the performance of the Onkyo with its beefier power supply and more power. My fears were soon put to rest.
After swapping out the units, I set up the A2A. It only took 10 minutes, including running YPAO to calibrate the system. I designed the room carefully and it has acoustic treatments, including bass traps. Therefore, the adjustments made by YPAO were minimal. We watched "No Time to Die", which has a well-regarded soundtrack full of dialog, music and special effects, including some beefy LFE. The A2A handled it all with aplomb, even at a higher-than-normal volume setting. I felt there was a noticeable improvement in audio quality. My adult son, who didn't know I upgraded to the Yamaha, remarked how the audio sounded more balanced and refined, which he attributed my sound treatments (he'd already heard the Onkyo after I had installed them).
Video quality is also excellent, seamlessly passing the HDR 4K signal to the projector. Although I'm frugal and didn't want to upgrade my AVR, I'm glad I did. I'm also glad I went with the A2A.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2024
★★★★★ 5
Yamaha RX A2A
Style: Receiver, Style: Receiver
It was time to replace my old receiver with a current version. Much of the technology has changed when comparing receivers today versus 20 years ago. However, the Yamaha RX – A2 A offered a great balance between price and features. Hooking up my existing components and high definition television was extremely easy. I would recommend downloading the users manual from the Yamaha website to brush up on all options and features available during set up. The sound reproduction is top notch. I also hear the difference in surround sound reproduction compared to my older model. Once you spend quality time setting up your receiver to reflect the setup you desire, this model does not disappoint. I was able to set up my second zone so I can listen to a completely different input compared to the main room. I especially like the value added Bluetooth feature so I can connect directly to the receiver without any wires connection.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 11, 2026
★★★★★ 5
Great Yamaha quality and features as expected.
Style: Receiver
Love it! Easy set up lots of options. Beautiful immersion sound.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2025